1 August 1993 Optimum design of liquid crystal display parameters in projection and direct view applications
Author Affiliations +
Optical Engineering, 32(8), (1993). doi:10.1117/12.143978
Abstract
Two kinds of liquid crystals are selected with the aid of computer simulation for the fabrication of high-contrast liquid crystal displays (LCDs). One is suitable for the first minimum operation of a twisted nematic LCD and the other is suitable for the second minimum operation. The contrast ratios in the normally white mode of the first minimum operation and the contrast ratio in the normally black mode of the second minimum operation are both higher than 100:1 . These LCDs can be used in direct view and projection applications.
Jia-Shyong Cheng, Tai-Kang Wu, Chia-Wei Hao, Ting-Chiang Hsieh, Yuh-Ga Gong, Hsiung-Kuang Chen, "Optimum design of liquid crystal display parameters in projection and direct view applications," Optical Engineering 32(8), (1 August 1993). http://dx.doi.org/10.1117/12.143978
JOURNAL ARTICLE
6 PAGES


SHARE
KEYWORDS
LCDs

Transmittance

Liquid crystals

Birefringence

Computer simulations

Polarizers

Cell mechanics

RELATED CONTENT

Optical properties of brain tissue
Proceedings of SPIE (September 14 1993)
Computer modeling of optical thin film deposition
Proceedings of SPIE (November 04 1994)
Technology trends in 40-Gbit/s transceivers and devices
Proceedings of SPIE (December 02 2005)
Enabling model customization and integration
Proceedings of SPIE (September 04 2003)
Tunable and flat optical delay line based on double rings...
Proceedings of SPIE (November 03 2016)

Back to Top