1 April 1994 Location of features of known height in the presence of reflective and refractive noise using a stereoscopic light-striping approach
Michael Magee, Richard Weniger, Ernest A. Franke
Author Affiliations +
Abstract
A method for isolating three-dimensional features of known height in the presence of noisy data is presented. The approach is founded on observing the locations of a single light stripe in the image planes of two spatially separated cameras. Knowledge relating to the heights of sought features is used to define regions of interest in each image, which are searched to isolate the light stripe. This approach is advantageous because spurious features that may result from random reflections or refractions in the region of interest of one image usually do not appear in the corresponding region of interest of the other image. It is shown that such a system is capable of robustly locating features such as very thin vertical dividers even in the presence of spurious or noisy image data that would normally cause conventional single-camera light-striping systems to fail. The discussion that follows summarizes the advantages of the methodology in relation to conventional passive stereoscopic systems as well as light-striped triangulation systems. Results that characterize the approach in noisy images are also provided.
Michael Magee, Richard Weniger, and Ernest A. Franke "Location of features of known height in the presence of reflective and refractive noise using a stereoscopic light-striping approach," Optical Engineering 33(4), (1 April 1994). https://doi.org/10.1117/12.163139
Published: 1 April 1994
Lens.org Logo
CITATIONS
Cited by 8 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Cameras

Imaging systems

3D image processing

Refraction

Laser systems engineering

Reflectivity

Image processing

RELATED CONTENT

Real time close range 3D non contact volume and motion...
Proceedings of SPIE (August 01 1990)
Measuring Soft Tissue Contour Information
Proceedings of SPIE (May 01 1989)
Grid Labeling Using A Marked Grid
Proceedings of SPIE (March 07 1989)
Acquiring 3-D Spatial Data Of A Real Object
Proceedings of SPIE (October 26 1983)

Back to Top