1 January 1994 Infrared projector optical design considerations
Author Affiliations +
Optical Engineering, 33(1), (1994). doi:10.1117/12.151513
Abstract
The optical considerations that need to be addressed during the design of IR projectors intended for application within real-time hardware-in-the-loop simulation systems are examined. Attention is paid to the form of the spatial frequency transfer function and, thereby, to the factors that affect the spatial resolution within the composite optical system defined by the IR projector and the imaging unit under test, with particular emphasis on the sampling effects (aliasing) that need to be avoided.
Owen M. Williams, "Infrared projector optical design considerations," Optical Engineering 33(1), (1 January 1994). http://dx.doi.org/10.1117/12.151513
JOURNAL ARTICLE
5 PAGES


SHARE
KEYWORDS
Projection systems

Raster graphics

Infrared imaging

Staring arrays

Optical design

Image quality

Signal attenuation

RELATED CONTENT

Comprehensive test of low-level-light image intensifiers
Proceedings of SPIE (October 03 1996)
Optical MEMS: boom, bust, and beyond
Proceedings of SPIE (January 22 2005)
FEL-FTIR spectroscopy of matrix-isolated formic acid
Proceedings of SPIE (July 27 1994)
Optimization of a low concentration photovoltaic system
Proceedings of SPIE (September 17 2014)

Back to Top