1 December 1994 Triple-clad single-mode fibers for dispersion flattening
Author Affiliations +
Abstract
A design procedure for triple-clad dispersion-flattened single-mode fibers is developed. Following this procedure, fibers are identified that have lower dopant concentrations in the core than those of previous dispersion-modified fiber designs, a second-mode cutoff wavelength close to the lower operating wavelength of 1300 nm, zeros of dispersion at 1300 and 1550 nm, a small bending loss at 1550nm (for a bend radius of 5.0 cm), and spot sizes that are large enough not to compromise the splicing loss.
Youwei Li, Conleth Denis Hussey, "Triple-clad single-mode fibers for dispersion flattening," Optical Engineering 33(12), (1 December 1994). https://doi.org/10.1117/12.184374 . Submission:
JOURNAL ARTICLE
7 PAGES


SHARE
Back to Top