1 June 1995 In-line fiber optic polarimeter with a 99% coupler
Bernhard Scholl, Thomas Stein, Arndt Neues, Konrad Mertens
Author Affiliations +
Abstract
A polarization transformer in combination with a polarization analyzer is well suited for the generation of any wanted polarization state. We describe the setup, calibration, and applications of an in-line fiber optic polarization detector (IPD) built with a fiber optic coupler of 99% coupling ratio. At the low power output port we use standard beamsplitters and polarizers to generate four different polarization dependent signals. For calibration, the polarization is measured at the high-power output port with an oft-line polarimeter (OPD). This enables the determination of the system matrix, which represents the relation between the polarization at the high-power port and the four signals at the low-power port. With this system matrix, a continuous and accurate determination of the polarization at the high-power output port is possible.
Bernhard Scholl, Thomas Stein, Arndt Neues, and Konrad Mertens "In-line fiber optic polarimeter with a 99% coupler," Optical Engineering 34(6), (1 June 1995). https://doi.org/10.1117/12.202088
Published: 1 June 1995
Lens.org Logo
CITATIONS
Cited by 9 scholarly publications and 5 patents.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Polarization

Fiber optics

Calibration

Beam splitters

Polarimetry

Polarizers

Sensors

Back to Top