1 December 1995 Optical sensor based on coated light guides
Author Affiliations +
Optical Engineering, 34(12), (1995). doi:10.1117/12.215506
A new type of intensity-modulated sensors based on a coated light guide is presented. These sensors operate preferentially in the regime of total internal reflection (TIR), rather than relying on violation of TIR as in conventional intensity-modulated sensors. Using a physical model of the new sensor structure, the output light intensity is computed as a function of the complex reflection and transmission coefficients at the substrate-film and film-ambient interfaces. Based on the theoretical results, an experimental setup has been constructed and evaluated for measurements on various liquids. The results confirm the predicted dependence of the output signal on the characteristics of the substrate-film-ambient system. Of particular importance is the novel feature that the output signal increases as the refractive index of the ambient medium increases, at certain incidence angles.
Anatoly Babchenko, Josef S. Bodenheimer, Meir Nitzan, "Optical sensor based on coated light guides," Optical Engineering 34(12), (1 December 1995). https://doi.org/10.1117/12.215506


New type of light-guide sensor
Proceedings of SPIE (August 13 1993)
Low-cost optical liquid level sensors
Proceedings of SPIE (November 11 1999)
Sol-gel derived planar waveguides for sensor applications
Proceedings of SPIE (September 22 2003)

Back to Top