1 August 1995 High-power monomode fiber lasers
Author Affiliations +
Abstract
The output power of cw monomode fiber lasers, commonly operated far below 1 W, can be enhanced using a double-clad fiber structure. Double-clad fibers can be excited with powerful multimode laserdiode arrays. An output power of several watts has already been demonstrated in a Nd3+-doped double-clad fiber. A further enhancement of the laser power can be achieved by side pumping the fiber. An upper limit of the order of 100 W given by the damage threshold of the fiber can be estimated for a multi-side-pumped system. As for the case of crystal lasers, even more output power in the fundamental mode can be obtained by coherent combination of several lasers. This procedure can be performed by active phase adjustment between identical lasers: The adjustment of the phase can be realized rather elegantly in fibers by squeezing or stretching the fibers with a piezoelectric element. Even if we are still far from the practical realization of a 100-W monomode fiber laser, all the different steps leading to high output power have been demonstrated to work.
Willy A.R. Luethy, Willy A.R. Luethy, Heinz P. Weber, Heinz P. Weber, } "High-power monomode fiber lasers," Optical Engineering 34(8), (1 August 1995). https://doi.org/10.1117/12.205659 . Submission:
JOURNAL ARTICLE
4 PAGES


SHARE
RELATED CONTENT

Dual-wavelength Nd:CaLnAlO4 lasers at 1.365 and 1.390 µm
Proceedings of SPIE (February 14 2018)
980 nm Yb doped single mode fiber laser and its...
Proceedings of SPIE (August 28 2009)
Intracavity doubling of cw LD pumped Nd S FAP laser...
Proceedings of SPIE (September 29 1996)
Continuous-wave-fiber-laser-pumped Ti:sapphire laser
Proceedings of SPIE (August 23 2011)
High power LD end pumped Nd YVO4 laser as a...
Proceedings of SPIE (January 16 2007)
Diode pumped laser with Yb YAG single crystal fiber grown...
Proceedings of SPIE (February 27 2009)

Back to Top