1 October 1996 Image motion restoration from a sequence of images
Author Affiliations +
Optical Engineering, 35(10), (1996). doi:10.1117/1.600959
Abstract
The restoration of images blurred as a result of image motion or vibration is discussed. The key to the success of the restoration algorithm is accurately determining the optical transfer function (OTF) representing the image motion degradation in the spatial frequency domain. The basic method of obtaining the OTF from the measured function of relative displacement between the camera and the object using a motion sensor has been developed recently and is discussed elsewhere (Sezan and Lagendijk, 1993). The motion function is derived instead from an analysis of a sequence of consecutive images. The first step is to obtain the image motion information from the sequence of images according to two well-known algorithms—the block-matching algorithm (BMA) and the edge trace tracking (ETT). The basis for these two methods consists of tracking a block or an edge through a sequence of several consecutive images. Results of these two methods were fitted to a sinusoidal vibration function and compared; there was excellent agreement between them. Finally, the image is restored using the OTF estimated via the tracking method.
Ofer Hadar, M. Robbins, Y. Novogrozky, D. Kaplan, "Image motion restoration from a sequence of images," Optical Engineering 35(10), (1 October 1996). https://doi.org/10.1117/1.600959
JOURNAL ARTICLE
7 PAGES


SHARE
RELATED CONTENT

Vibrated image restoration from two consecutive images
Proceedings of SPIE (September 22 1997)
Image motion restoration from a sequence of images
Proceedings of SPIE (May 26 1995)
Restoration of images degraded by mechanical vibrations
Proceedings of SPIE (July 05 1994)
Robust local restoration of space-variant blur image
Proceedings of SPIE (March 03 2008)
Restoration of images degraded by motion
Proceedings of SPIE (October 01 1992)

Back to Top