1 October 1996 Wavelength insensitive fiber optic sensor based on an axially strained fused coupler
Author Affiliations +
Optical Engineering, 35(10), (1996). doi:10.1117/1.600961
Abstract
A wavelength insensitive fiber optic strain sensor configuration is presented. It consists of two variable ratio couplers in series: a reference and a sensing element. Difference-over-sum processing yields linear outputs that are insensitive to fluctuations in optical intensity. By subtracting the reference from the sensor output, wavelength compensation is achieved. The wavelength properties of this sensor were determined experimentally and the results compared to computer simulations. Theoretical and experimental results show good agreement. The compensation technique is suitable for any variable ratio coupler sensor and is not limited to axially strained fused tapered couplers.
Andre Booysen, Pieter L. Swart, Beatrys M. Lacquet, Stephanus J. Spammer, "Wavelength insensitive fiber optic sensor based on an axially strained fused coupler," Optical Engineering 35(10), (1 October 1996). https://doi.org/10.1117/1.600961
JOURNAL ARTICLE
5 PAGES


SHARE
RELATED CONTENT

Modulated-Splitting-Ratio Fiber-Optic Temperature Sensor
Proceedings of SPIE (February 01 1989)
Optimizing Fiber Optic Microbend Sensor
Proceedings of SPIE (April 28 1987)
Research on a curved optical fiber
Proceedings of SPIE (April 01 1991)
Fibre-Optic Pressure Sensor For Internal Combustion Engines
Proceedings of SPIE (February 09 1989)

Back to Top