1 February 1996 Subnanosecond sampling all-optical analog-to-digital converter using symmetric self-electro-optic effect devices
Author Affiliations +
Optical Engineering, 35(2), (1996). doi:10.1117/1.600915
Abstract
A system to convert an analog optical system to a digital one in an optical environment using basic symmetric self-electro-optic effect devices (S-SEEDs) is detailed. It is shown that quantization and binary encoding can readily be achieved using the logic capabilities of S-SEEDs. A quantizer prototype has been constructed and proper operation observed. The effect of the hysteresis inherent in the S-SEED is discussed and three techniques are proposed to eliminate the problems caused by hysteresis. The logic operations needed for the construction of the binary encoder with the minimum number of S-SEEDs are facilitated using a reference beam. An alternate, efficient design of the binary encoder is also presented. Using a novel time quantization technique, a sampling rate in excess of 1 gigasamples/s is achievable.
Lup M. Loh, Joseph L. LoCicero, "Subnanosecond sampling all-optical analog-to-digital converter using symmetric self-electro-optic effect devices," Optical Engineering 35(2), (1 February 1996). http://dx.doi.org/10.1117/1.600915
JOURNAL ARTICLE
10 PAGES


SHARE
KEYWORDS
Clocks

Binary data

Computer programming

Logic

Switching

Beam splitters

Diodes

RELATED CONTENT

Gemini WFS CCDs and controllers
Proceedings of SPIE (July 09 1998)
Varifocal zone plates obtained by moire
Proceedings of SPIE (October 21 2004)
Fast algorithms for video target detection and tracking
Proceedings of SPIE (April 17 2008)

Back to Top