1 January 1997 Radiometry using a platinum silicide detector
Author Affiliations +
Platinum silicide (PtSi) staring array detectors have recently been developed and applied in a number of applications to perform medium wave infrared (MWIR) observations and radiometry. PtSi detectors have a strongly wavelength dependent response function, which results in a requirement to have much more a priori knowledge of an object to perform radiometric calculations than is required of a flat response detector. The impact of this wavelength dependence is examined and radiometric calibration procedures are developed for both resolved and unresolved targets.
John N. Sanders-Reed, John N. Sanders-Reed, } "Radiometry using a platinum silicide detector," Optical Engineering 36(1), (1 January 1997). https://doi.org/10.1117/1.601166 . Submission:


Teal Amber Development And Field Demonstration Results
Proceedings of SPIE (December 11 1979)
The BAMM IIA Radiometer
Proceedings of SPIE (January 18 1984)
Effect Of Target Signatures On Active Tracking
Proceedings of SPIE (January 31 1987)
Thermal infrared subsystem design status of ASTER
Proceedings of SPIE (July 31 1991)

Back to Top