1 April 1997 Front and back illumination of coated substrates for in-depth localization of absorption
Author Affiliations +
Optical Engineering, 36(4), (1997). doi:10.1117/1.601239
Abstract
We experimentally demonstrate that part of the absorptance of coated multicomponent glass substrates results from a photoinduced absorptance of the substrate during the evaporation process. This increase in the glass substrate absorptance is due to a solarization process by UV radiation, which is produced in the coating plant when electrons emitted by the electron gun interact with the material to be evaporated. Thus, we can experimentally show the dependence of the multicomponent glass substrate absorptance on the evaporation time. An original method of front and back illumination of samples is presented that enables the separation of each part of the in-depth absorptance using photothermal measurements: bulk and interface absorption of the thin film and substrate photoinduced absorption. This new method overcomes the difficulties presented by other measurement techniques and caused by the dependence of substrate and interface absorptances on the evaporation time. Absorption losses in different single-layer films are balanced.
Ludovic Escoubas, Pierre J. Roche, Mireille Commandre, "Front and back illumination of coated substrates for in-depth localization of absorption," Optical Engineering 36(4), (1 April 1997). https://doi.org/10.1117/1.601239
JOURNAL ARTICLE
8 PAGES


SHARE
Back to Top