1 May 1997 Trade-off study and computer simulation for assessing spacecraft pointing accuracy and stability capabilities
Author Affiliations +
Abstract
A case study, written in a tutorial manner, is presented where a comprehensive computer simulation is developed to determine the driving factors contributing to spacecraft pointing accuracy and stability. Models for major system components are described. Among them are spacecraft bus, attitude controller, reaction wheel assembly, star-tracker unit, inertial reference unit, and gyro drift estimators (Kalman filter). The predicted spacecraft performance is analyzed for a variety of input commands and system disturbances. The primary deterministic inputs are the desired attitude angles and rate set points. The stochastic inputs include random torque disturbances acting on the spacecraft, random gyro bias noise, gyro random walk, and star-tracker noise. These inputs are varied over a wide range to determine their effects on pointing accuracy and stability. The results are presented in the form of trade-off curves designed to facilitate the proper selection of subsystems so that overall spacecraft pointing accuracy and stability requirements are met.
Marcelo C. Algrain, Richard M. Powers, "Trade-off study and computer simulation for assessing spacecraft pointing accuracy and stability capabilities," Optical Engineering 36(5), (1 May 1997). https://doi.org/10.1117/1.601377
JOURNAL ARTICLE
10 PAGES


SHARE
Back to Top