1 August 1997 High-resolution optic displacement measurement using a dual photodiode sensor
Author Affiliations +
Comparative displacement measurements are made using laser diode (LD) and light emitting diode sources, fiber optic collimators, and a dual-photodiode detector (DPD). It is shown that a relative displacement resolution < 2 nm is possible with the LD source. This result is interpreted to indicate that the coherent LD sources illuminating the DPD temporally correlates the mutual irradiation function of the signals between each photodiode segment and significantly reduce electronic (shot) noise, reduces the variance, and thereby enhances resolution.
John L. Remo, John L. Remo, } "High-resolution optic displacement measurement using a dual photodiode sensor," Optical Engineering 36(8), (1 August 1997). https://doi.org/10.1117/1.601454 . Submission:


Anti-biofouling coatings for optical fiber sensors
Proceedings of SPIE (February 13 2002)
Modulated-Splitting-Ratio Fiber-Optic Temperature Sensor
Proceedings of SPIE (January 31 1989)
Fiber optic electric-field microsensor
Proceedings of SPIE (March 04 1993)
Low cost fiber optic pH sensor for the in situ...
Proceedings of SPIE (November 25 1996)
Development of an extended range fiber optic pH sensor using...
Proceedings of SPIE (September 28 1995)

Back to Top