Translator Disclaimer
1 September 1997 Holographic interferometric microscope for complete displacement determination
Author Affiliations +
Holographic microscopy for the simultaneous interferometric determination of all displacement components is described. The recording and the evaluation procedures are optimized by three illumination directions and conjugate reconstruction, respectively. Microscopic observation is completely separated from holographic recording. The holographic microscope performs maximum flexibility of magnification combined with high imaging accuracy. The phase-shift technique and Fourier analysis with a carrier frequency are applied for interferogram evaluation. Both methods are compared regarding the measurement range, accuracy, and handling. In-plane and out-of-plane displacement components can be measured simultaneously by both evaluation methods. A cantilever beam, a circular plate, and a surface-mounted microresistor are used to demonstrate the capabilities of the holographic microscope.
Oliver Kruschke, Guenther K.G. Wernicke, Torsten Huth, Nazif Demoli, and Hartmut Gruber "Holographic interferometric microscope for complete displacement determination," Optical Engineering 36(9), (1 September 1997).
Published: 1 September 1997

Back to Top