1 January 1998 Laser application for optical glass polishing
Author Affiliations +
Abstract
Rapid generation of large area polished optical surfaces by high-power CO2 laser irradiation is shown. Results focus on glasses with high expansion coefficients (??10-5/°C) conventionally used in the optical industry. The technique involves active beam integration to obtain an intensity irradiation profile with a good uniformity over large spot sizes and is applied to preheated glass samples with initial rms roughness up to 500 nm. To find out the conditions for successful and reliable use of the proposed laser polishing method, the laser-driven heating process was monitored by means of the surface and depth temperature distributions. Whereas the former was determined in situ from the IR radiation emitted by the glass surface, the latter was obtained by comparison of the IR radiation emitted by the bulk sample with a theoretical model. Laser polishing of 5000 mm2 glass surfaces is reported and processes involved in the modification of the surface texture of the irradiated samples are described and discussed.
Fidel Vega, Fidel Vega, Nuria Bas Lupon, Nuria Bas Lupon, Jesus Armengol Cebrian, Jesus Armengol Cebrian, Ferran Laguarta, Ferran Laguarta, } "Laser application for optical glass polishing," Optical Engineering 37(1), (1 January 1998). https://doi.org/10.1117/1.601614 . Submission:
JOURNAL ARTICLE
8 PAGES


SHARE
RELATED CONTENT

Laser strengthening of tool steels
Proceedings of SPIE (January 22 2007)
Laser application for optical glass polishing
Proceedings of SPIE (August 18 1996)
Surface dynamics during laser polishing of glass
Proceedings of SPIE (September 19 1999)
Grating fabrication with CW CO2 laser irradiation
Proceedings of SPIE (September 11 2002)
Laser glass marking: influence of pulse characteristics
Proceedings of SPIE (October 11 2005)

Back to Top