1 December 1998 Two fiber-ribbon ring networks for parallel and distributed computing systems
Author Affiliations +
Ring networks made of fiber-ribbon point-to-point links are proposed. The first network is a control-channel based network in which one fiber in each link joins with others to form a control-channel ring. This ring improves performance of the network by sending medium access control information immediately before the data transmissions. High throughputs can be achieved in the network due to pipelining, i.e., several packets can travel through the network simultaneously but in different segments of the ring. The network can meet tough performance demands in, e.g., massively parallel signal processing systems, which is shown by example. Also, real-time demands can be met using slot reserving. The network, called CC-FPR (control-channel based fiberribbon pipeline ring), can be built today using off-the-shelf fiber optic components. The increasingly good price/performance ratio for fiberribbon links indicates a high potential for the success of the proposed kind of networks; a prototype is currently under development. The second network is similar to first except that it divides the network into two subnetworks, one for packet-switched traffic and one for circuit-switched traffic. When the main data flow in the network does not change rapidly, this is a good choice for a simple but powerful network.
Magnus Jonsson, Magnus Jonsson, } "Two fiber-ribbon ring networks for parallel and distributed computing systems," Optical Engineering 37(12), (1 December 1998). https://doi.org/10.1117/1.601996 . Submission:


FPGA mezzanine card DSP module
Proceedings of SPIE (October 06 2011)
Distributed numerical controllers
Proceedings of SPIE (December 26 2001)
A novel scheme on internetworking for WDM optical networks
Proceedings of SPIE (November 18 2007)

Back to Top