1 May 1998 Diffractive element in optical inspection of paper
Author Affiliations +
A computer-generated diffractive optical element to produce 4 x4 spot matrix images was fabricated by electron-beam lithography. The element was applied to the inspection of paper sheets. Images of spot matrices were analyzed, and agreement between the reflectance measured by the present sensor and a spectrophotometer was observed. The sensor image was able to yield information about local curvature as well as defects. Moreover, sensor images from surfaces of different paper samples revealed material surface anisotropy in the cross-correlation analysis of image data.
Raimo Veil Johannes Silvennoinen, Raimo Veil Johannes Silvennoinen, Kai-Erik Peiponen, Kai-Erik Peiponen, Jari T. Rasanen, Jari T. Rasanen, Mika Sorjonen, Mika Sorjonen, Eino Keranen, Eino Keranen, Tomoaki Eiju, Tomoaki Eiju, Koji Tenjimbayashi, Koji Tenjimbayashi, Kiyofumi Matsuda, Kiyofumi Matsuda, } "Diffractive element in optical inspection of paper," Optical Engineering 37(5), (1 May 1998). https://doi.org/10.1117/1.601664 . Submission:

Back to Top