1 August 1998 Micromirror fabrication using dye doped plastic
Author Affiliations +
Optical Engineering, 37(8), (1998). doi:10.1117/1.602020
Abstract
It is shown that micromirrors can be made by ablating a dyed plastic using visible light. To test the optical quality of the micromirrors, methods such as the Ronchi and Foucault tests are applied. A commercial interferometer is also used to find their aberrations.
Sergio Calixto-Carrera, Zacarias Malacara, "Micromirror fabrication using dye doped plastic," Optical Engineering 37(8), (1 August 1998). http://dx.doi.org/10.1117/1.602020
JOURNAL ARTICLE
4 PAGES


SHARE
KEYWORDS
Micromirrors

Mirrors

Polymers

Microscopes

Optical fabrication

Gas lasers

Microlens

Back to Top