1 May 1999 Dynamic minimum resolvable temperature testing for staring array imagers
Author Affiliations +
Optical Engineering, 38(5), (1999). doi:10.1117/1.602281
Abstract
Experimental results of dynamic minimum resolvable temperature (DMRT) testing of a staring array thermal imager are reported. Temporal effects of scanning four bar targets are discussed. The impact of target phase for static minimum resolvable temperature (MRT) tests is presented and shown through measured results. Details of the DMRT test are offered as guidelines for such tests. DMRT test results are shown as a function of scanning speed. Results for good image uniformity are compared to results with poor image uniformity. The experimental results are used to determine the perceived resolution increase as a function of target speed. An optimum scanning speed is identified and discussed. The DMRT results at this optimum scanning speed are compared to the static MRT results.
Curtis M. Webb, Carl E. Halford, "Dynamic minimum resolvable temperature testing for staring array imagers," Optical Engineering 38(5), (1 May 1999). https://doi.org/10.1117/1.602281
JOURNAL ARTICLE
7 PAGES


SHARE
Back to Top