1 April 2000 All-optical fiber optic interface for sensors and actuators
Pentti Karioja, Risto Jurva, Kimmo Keraenen, Kari Tukkiniemi, Jouko Haapamaa, Ari Tervonen, Marja Englund
Author Affiliations +
The feasibility of an all-optical fiber optic interface for sensors and actuators is demonstrated. The interface module converts optical power to electrical power for the use of the sensor or the actuator. In addition, the module provides bidirectional optical data transmission between the sensor or actuator and a control unit by using the powerfeeding fiber as a data transmission media. Optical power and data is transmitted to the sensor or actuator via a single multimode fiber. The system comprises of a customized 10-cell photovoltaic array illuminated by the use of a customized 1 x 10 integrated optics coupler. A 41% optical-to-electrical power conversion efficiency was obtained for the photovoltaic array, and a 27% total optical-to-electrical power conversion efficiency was attained for the system. When a single element in the array was biased as an LED, a -33 dBm optical power was coupled to the multimode fiber.
Pentti Karioja, Risto Jurva, Kimmo Keraenen, Kari Tukkiniemi, Jouko Haapamaa, Ari Tervonen, and Marja Englund "All-optical fiber optic interface for sensors and actuators," Optical Engineering 39(4), (1 April 2000). https://doi.org/10.1117/1.602463
Published: 1 April 2000
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Waveguides

Sensors

Integrated optics

Photovoltaics

Solar cells

Actuators

Interfaces

Back to Top