1 January 2000 Analysis of 3-D surface waviness on standard artifacts by retroreflective metrology
Author Affiliations +
Optical Engineering, 39(1), (2000). doi:10.1117/1.602350
Abstract
Retroreflective metrology has been used to measure the 3-D surface waviness on standard artifacts. An optical configuration was constructed for the measurement, in which the grating image is produced by projection. The three-step algorithm of phase-shifting technology was applied to analyze the image. Two standard artifacts with 8.0- and 16.0-µm peak-to-peak wave amplitudes were tested. The experiments show that retroreflective metrology can successfully recover the contour and amplitude of the surface waviness on the standard artifacts. © 2000 Society of Photo-Optical Instrumentation Engineers. [S0091-3286(00)02101-2]
XianZhu Zhang, Walter P. T. North, "Analysis of 3-D surface waviness on standard artifacts by retroreflective metrology," Optical Engineering 39(1), (1 January 2000). http://dx.doi.org/10.1117/1.602350
JOURNAL ARTICLE
4 PAGES


SHARE
KEYWORDS
Metrology

3D imaging standards

Image analysis

3D metrology

Image processing

Projection systems

Standards development

RELATED CONTENT


Back to Top