1 April 2000 All-optical fiber optic interface for sensors and actuators
Author Affiliations +
Optical Engineering, 39(4), (2000). doi:10.1117/1.602463
Abstract
The feasibility of an all-optical fiber optic interface for sensors and actuators is demonstrated. The interface module converts optical power to electrical power for the use of the sensor or the actuator. In addition, the module provides bidirectional optical data transmission between the sensor or actuator and a control unit by using the powerfeeding fiber as a data transmission media. Optical power and data is transmitted to the sensor or actuator via a single multimode fiber. The system comprises of a customized 10-cell photovoltaic array illuminated by the use of a customized 1 x 10 integrated optics coupler. A 41% optical-to-electrical power conversion efficiency was obtained for the photovoltaic array, and a 27% total optical-to-electrical power conversion efficiency was attained for the system. When a single element in the array was biased as an LED, a -33 dBm optical power was coupled to the multimode fiber.
Pentti Karioja, Risto Jurva, Kimmo Keraenen, Kari Tukkiniemi, Jouko Haapamaa, Ari Tervonen, Marja Englund, "All-optical fiber optic interface for sensors and actuators," Optical Engineering 39(4), (1 April 2000). https://doi.org/10.1117/1.602463
JOURNAL ARTICLE
6 PAGES


SHARE
Back to Top