1 July 2000 Conformal dome correction with counterrotating phase plates
Author Affiliations +
Windows and domes that are shaped to aerodynamic requirements can increase range and speed for the host platform. This class of optical systems is referred to as conformal optics. The solution discussed here is intended for conformal missile systems having gimbals that point the optical line of sight through different parts of the dome. A conformal dome induces large amounts of varying aberration, tens to hundreds of waves across gimbal angle, and therefore requires dynamic correction. Space is very constricted in missile sensors, and it is therefore highly desirable to limit the number of motors used for aberration correction. This paper describes the performance of a new class of optical systems that employ counterrotating phase prisms to correct conformal dome aberrations while gimbaling the optical system. The phase surfaces on the prisms are described by Zernike circular polynomials. Since the shear across the phase surfaces is rotational, the only aberrations that are generated are those without rotational symmetry, such as tilt, coma, or astigmatism. Using this approach, CODE V® was used to analyze and design a compact, high-performance conformal optical system.
Scott W. Sparrold, Scott W. Sparrold, James P. Mills, James P. Mills, David J. Knapp, David J. Knapp, Kenneth S. Ellis, Kenneth S. Ellis, Thomas A. Mitchell, Thomas A. Mitchell, Paul K. Manhart, Paul K. Manhart, } "Conformal dome correction with counterrotating phase plates," Optical Engineering 39(7), (1 July 2000). https://doi.org/10.1117/1.602564 . Submission:


Fundamentals of conformal dome design
Proceedings of SPIE (December 22 2002)
Aberrations of optical domes
Proceedings of SPIE (September 20 1998)
Image plane tilt in optical systems
Proceedings of SPIE (November 30 1991)

Back to Top