1 September 2000 Fast phase-map recovery from large shears in an electronic speckle-shearing pattern interferometer using a Fourier least-squares estimation
Author Affiliations +
Abstract
Electronic speckle-shearing pattern interferometry offers the possibility of analyzing out-of-plane and in-plane deformations in experimental mechanics. However, to obtain high-contrast fringes this technique must introduce large shears into the speckle patterns. Several techniques have recently been proposed to recover the phase from these data, but they all suffer limitations due to the slow convergence of the proposed algorithms or to the low precision of the recovered phase. This paper presents a least-squares estimation method in the frequency domain that allows wavefront recovery from two orthogonal shearing fringe patterns when a large shear is applied. This method is based on the application of a single Fourier filter using the fast Fourier transform process. The experimental results obtained by using electronic speckleshearing pattern interferometry for the analysis of a finite circular plate deformed at the center illustrate the advantages of the proposed technique.
Abundio Davila, Abundio Davila, Manuel Servin Guirado, Manuel Servin Guirado, Mauro Facchini, Mauro Facchini, } "Fast phase-map recovery from large shears in an electronic speckle-shearing pattern interferometer using a Fourier least-squares estimation," Optical Engineering 39(9), (1 September 2000). https://doi.org/10.1117/1.1287260 . Submission:
JOURNAL ARTICLE
8 PAGES


SHARE
Back to Top