1 January 2001 New laser rangefinder for three-dimensional shape measurement of specular objects
Author Affiliations +
Optical Engineering, 40(1), (2001). doi:10.1117/1.1331269
We describe a new laser rangefinder for measurement of the shapes of specular objects. In many industrial contexts, objects with both Lambertian surfaces and specular surfaces are often manipulated. However, ordinary laser rangefinders usually cannot be used to measure specular objects. We propose a laser rangefinder for the measurement of specular objects based on a new idea in which the incident angle of a light-stripe upon the image sensor is limited through the use of a special light device. The concept of this rangefinder involves the application of triangulation to specular objects, which enables measurement of the shape of specular objects as well as Lambertian objects. We designed and built a prototype light-stripe projection rangefinder based on these principles. Experiments using the rangefinder successfully demonstrate the rangefinder's accuracy. The proposed rangefinder is a promising tool for the performance of many common industrial tasks including measurement of the shapes of polished metal and the inspection of soldered joint surfaces.
Mitsuru Baba, Kozo Ohtani, Makoto Imai, Tadataka Konishi, "New laser rangefinder for three-dimensional shape measurement of specular objects," Optical Engineering 40(1), (1 January 2001). http://dx.doi.org/10.1117/1.1331269

Image sensors



Charge-coupled devices

Commercial off the shelf technology


Optical engineering

Back to Top