1 October 2001 Surface imperfections: specimen measurement by microscope and digital camera
Author Affiliations +
Optical Engineering, 40(10), (2001). doi:10.1117/1.1405159
Abstract
An existing design of a microscope image comparator (MIC) for the measurement of surface imperfections, referenced in International Organisation for Standardization (ISO) 10110-7:1996, is judged too costly for use by small companies manufacturing optical components. A simple stripped-down version of the MlC using components recently made available in most laboratories is described. The use of the instrument is demonstrated by measurement of imperfections on two samples of scratch and dig paddle.
Lionel R. Baker, "Surface imperfections: specimen measurement by microscope and digital camera," Optical Engineering 40(10), (1 October 2001). https://doi.org/10.1117/1.1405159
JOURNAL ARTICLE
2 PAGES


SHARE
RELATED CONTENT

Scratch And Dig Measurement - A Way Ahead
Proceedings of SPIE (March 23 1987)
Objective Standards For Surface Flaws
Proceedings of SPIE (April 11 1989)
Surface damage metrology: precision at low cost
Proceedings of SPIE (November 11 2002)
Standard for surface damage
Proceedings of SPIE (April 01 1992)

Back to Top