1 December 2001 Application of V3+:YAG crystals for Q-switching and mode-locking of 1.3-um diode-pumped neodymium lasers
Author Affiliations +
High-power passive Q-switching and mode-locking operation regimes of diode end-pumped Nd:YAG, Nd:YVO4, and Nd:YAP active media, operating at a 1.34-?m wavelength are investigated with V3+:YAG crystal as the saturable absorber. The highest average power of 2.1 W results from a Nd:YVO4 crystal placed in a 70-mm-long linear cavity. The corresponding pulse peak power and width are 0.1 kW and 133 ns, respectively. Employing a Nd:YAP crystal and 35-mm cavity length, the highest peak power of ~2.8 kW results when the laser runs at a 6.5-kHz repetition rate for an average power of —0.4 W. A record of 79-xJ pulse energy results from a 64-mm-long resonator with Nd:YAG gain media, however, for a decreased average power of ~0.24 W and pulses of 40-ns width. The mode-locking operation regime is investigated in a Z-type cavity. The best results, namely, ~0.5 W average power with mode-locked envelope energy in excess of 30 ?J and mode- locked pulse energy of 0.7 ?J, are obtained from the Nd:YVO4 media. Trains of 1-?s-wide pulses with improved stability result from a 1.5-m- long designed cavity with KTP crystal applied for passive negative feedback. A numerical modeling that takes into account the short recovery time of V3+:YAG saturable absorber (~5 ns) and excited state absorption effect is used to analyze and obtain general rules for optimizing such lasers.
© (2001) Society of Photo-Optical Instrumentation Engineers (SPIE)
Jan Karol Jabczynski, Jan Karol Jabczynski, Krzysztof Kopczynski, Krzysztof Kopczynski, Zygmunt Mierczyk, Zygmunt Mierczyk, Antoniangelo Agnesi, Antoniangelo Agnesi, Annalisa Guandalini, Annalisa Guandalini, Giancarlo C. Reali, Giancarlo C. Reali, } "Application of V3+:YAG crystals for Q-switching and mode-locking of 1.3-um diode-pumped neodymium lasers," Optical Engineering 40(12), (1 December 2001). https://doi.org/10.1117/1.1418716 . Submission:


Back to Top