1 August 2001 Fabrication of continuous surface-relief gratings using a high-precision diamond-cutting process
Author Affiliations +
Optical Engineering, 40(8), (2001). doi:10.1117/1.1370386
Abstract
Direct fabrication of continuous surface-relief gratings on acrylics using a high-precision diamond-cutting process is reported. Critical conditions such as the diamond-tip radius and cutting step were selected by taking account of a designed grating profile and an expected roughness on the obtained grating surface. Experimental results for a 13-fanout continuous phase grating are presented. The phase profile was optimized using a stochastic design algorithm. A 3-mm-thick acrylic plate was carved into a grating that provided a measured efficiency of 85% with Fresnel reflection losses uncorrected. The diffracted intensity distribution was rather sensitive to any departure from the designed profile, the 0th-order intensity being particularly affected. Compensating the material's springback was found critical to the grating's performance.
Jun Amako, Hitoshi Nakao, Shinichiro Ochiai, "Fabrication of continuous surface-relief gratings using a high-precision diamond-cutting process," Optical Engineering 40(8), (1 August 2001). https://doi.org/10.1117/1.1370386
JOURNAL ARTICLE
8 PAGES


SHARE
RELATED CONTENT


Back to Top