1 October 2002 Novel piezoelectric actuators for tuning an optical fiber Bragg grating
Author Affiliations +
A method of stretching optical fiber holds interest for measuring strain in smart structures where the physical displacement may be used to tune optical fiber lasers. A small, lightweight, tunable fiber laser is ideal for demodulating strain in optical fiber Bragg gratings (FBGs) attached to smart structures such as the reusable launch vehicle that is being developed by NASA. A method is presented for stretching optical fibers using the thin-layer composite unimorph ferroelectric driver and sensor (THUNDER) piezoelectric actuators invented at NASA Langley Research Center. THUNDER actuators use a piezoelectric layer bonded to a metal backing to enable the actuators to produce displacements larger than the unbonded piezoelectric material. The shift in reflected optical wavelength resulting from stretching the FBG is presented. Means of adapting THUNDER actuators for stretching optical fibers are discussed, including ferrules, ferrule clamp blocks, and plastic hinges made with stereo lithography.
© (2002) Society of Photo-Optical Instrumentation Engineers (SPIE)
Sidney G. Allison, Sidney G. Allison, Robert Lee Fox, Robert Lee Fox, Mark E. Froggatt, Mark E. Froggatt, Brooks A. Childers, Brooks A. Childers, } "Novel piezoelectric actuators for tuning an optical fiber Bragg grating," Optical Engineering 41(10), (1 October 2002). https://doi.org/10.1117/1.1504723 . Submission:

Back to Top