1 February 2002 Design and simulation of a two-sectional Fabry-Perot sampled grating distributed Bragg reflector laser for dense wavelength division multiplexing applications
Author Affiliations +
Optical Engineering, 41(2), (2002). doi:10.1117/1.1428296
Abstract
We report the theory of operation and time domain model (TDM) simulation results for a two-section Fabry-Pe´ rot sampled grating distributed Bragg reflector (FP/SGDBR), 100-GHz, step-tunable laser [sidemode suppression rate (SMSR)>38 dB]. Although the main idea, the Vernier effect, was previously published, we present for the first time these two-section combinations for this specific sort of application.
Magdy Hussein Mourad, Jean-Pierre Vilcot, Didier J. Decoster, Dominique D. Marcenac, "Design and simulation of a two-sectional Fabry-Perot sampled grating distributed Bragg reflector laser for dense wavelength division multiplexing applications," Optical Engineering 41(2), (1 February 2002). http://dx.doi.org/10.1117/1.1428296
JOURNAL ARTICLE
5 PAGES


SHARE
KEYWORDS
Optical filters

Linear filtering

Reflectivity

Dense wavelength division multiplexing

Optical design

Optical simulations

Distributed Bragg reflectors

RELATED CONTENT

Laser Vibrometer For Tie Bar Vibration Studies
Proceedings of SPIE (July 31 1989)
Spatial coherence of low-cost 532nm green lasers
Proceedings of SPIE (March 15 2013)
0.35-micron DUV lithography for poly gate layer
Proceedings of SPIE (May 01 1994)
Grating Structures In Integrated Optics
Proceedings of SPIE (January 18 1985)

Back to Top