1 November 2003 Parameters for designing autostereoscopic imaging systems based on lenticular, parallax barrier, and integral photography plates
Author Affiliations +
Optical Engineering, 42(11), (2003). doi:10.1117/1.1615259
Abstract
In designing an autostereoscopic imaging system based on either a lenticular, parallax barrier, or integral photography (IP) plate, geometrical parameters relating the viewing zone and image display panel combined with the plate are the first things to be determined for the system. To define parameters such as the size of the panel, multiview image arrangement, pitch and focal length of the plate, viewing zone distance from the panel, and others, an optical configuration composed of an image mask aligned in front of a point light source array is used. With this configuration, the geometrical parameters are calculated and their relationships are found. In addition, the concept of pixel cells is introduced to arrange multiview images in the display panel for full parallax image generation.
Jung-Yong Son, Vladmir V. Saveljev, Yong-Jin Choi, Ji-Eun Bahn, Sung-Kyu Kim, Hyun-Hee Choi, "Parameters for designing autostereoscopic imaging systems based on lenticular, parallax barrier, and integral photography plates," Optical Engineering 42(11), (1 November 2003). https://doi.org/10.1117/1.1615259
JOURNAL ARTICLE
8 PAGES


SHARE
Back to Top