1 November 2003 Parameters for designing autostereoscopic imaging systems based on lenticular, parallax barrier, and integral photography plates
Author Affiliations +
Abstract
In designing an autostereoscopic imaging system based on either a lenticular, parallax barrier, or integral photography (IP) plate, geometrical parameters relating the viewing zone and image display panel combined with the plate are the first things to be determined for the system. To define parameters such as the size of the panel, multiview image arrangement, pitch and focal length of the plate, viewing zone distance from the panel, and others, an optical configuration composed of an image mask aligned in front of a point light source array is used. With this configuration, the geometrical parameters are calculated and their relationships are found. In addition, the concept of pixel cells is introduced to arrange multiview images in the display panel for full parallax image generation.
© (2003) Society of Photo-Optical Instrumentation Engineers (SPIE)
Jung-Yong Son, Jung-Yong Son, Vladmir V. Saveljev, Vladmir V. Saveljev, Yong-Jin Choi, Yong-Jin Choi, Ji-Eun Bahn, Ji-Eun Bahn, Sung-Kyu Kim, Sung-Kyu Kim, Hyun-Hee Choi, Hyun-Hee Choi, } "Parameters for designing autostereoscopic imaging systems based on lenticular, parallax barrier, and integral photography plates," Optical Engineering 42(11), (1 November 2003). https://doi.org/10.1117/1.1615259 . Submission:
JOURNAL ARTICLE
8 PAGES


SHARE
RELATED CONTENT

Finding Wheels Of Vehicles In Stereo Images
Proceedings of SPIE (August 21 1988)
Synthesizing 3D images based on voxels
Proceedings of SPIE (October 22 2003)
Pictorial Applications For Range Sensing Cameras
Proceedings of SPIE (June 23 1988)

Back to Top