1 February 2004 Measurements and modeling of modal birefringence and sensitivity to strain in a three-mode elliptical-core fiber
Author Affiliations +
Optical Engineering, 43(2), (2004). doi:10.1117/1.1635371
Abstract
We measure phase and group modal birefringence and also polarimetric strain sensitivity in a three-mode elliptical-core fiber for all spatial modes. Our results show a very high difference in fiber sensitivity to strain versus mode order, which is negative for the E11 mode and positive for E31 mode. We also model all measured parameters using Optiwave BPM-Cad and Cosmos/M software packages. The measured values of phase and group modal birefringence agree well with those obtained from calculations for all spatial modes. We do not observe as good an agreement between experimental and calculated values of strain sensitivity, which is most probably caused by the lack of reliable material constants for SiO2/GeO2 glasses.
Ewa Chmielewska, Waclaw Urbanczyk, "Measurements and modeling of modal birefringence and sensitivity to strain in a three-mode elliptical-core fiber," Optical Engineering 43(2), (1 February 2004). http://dx.doi.org/10.1117/1.1635371
JOURNAL ARTICLE
8 PAGES


SHARE
KEYWORDS
Birefringence

Phase measurement

Polarization

Polarimetry

Cladding

Refractive index

Glasses

Back to Top