1 August 2004 Novel fiber Bragg grating fabrication method with high-precision phase control
Author Affiliations +
Optical Engineering, 43(8), (2004). doi:10.1117/1.1757455
Abstract
A newly developed fiber Bragg grating (FBG) fabrication method is demonstrated. By combining a stable continuous-wave UV laser, a high precision electro-optical UV modulator, a compact and stable holographic setup, and a subnanometer precision air-bearing translation stage, the setup allows both apodization and phase of the FBGs to be continuously changed at each grating line. During the writing process, a fiber is moved constantly by the high-precision air-bearing stage, while the UV laser beam is switched on and off by a customized pulse train with nanosecond timing precision and forms a stable interference pattern on the fiber. The error of this system mainly results from the control signal's timing jitter, which is normally lower than 0.1%. Theoretical analysis and experimental results for gratings with various structures are demonstrated and discussed. They show good agreement, demonstrating that the fabrication method is capable of fabricating gratings with arbitrary apodization and phase design.
Yisi Liu, Jing-Jong Pan, Claire Gu, Feng-Qing Zhou, Liang Dong, "Novel fiber Bragg grating fabrication method with high-precision phase control," Optical Engineering 43(8), (1 August 2004). http://dx.doi.org/10.1117/1.1757455
JOURNAL ARTICLE
7 PAGES


SHARE
KEYWORDS
Fiber Bragg gratings

Apodization

Phase shift keying

Modulation

Optical design

Solids

Ultraviolet radiation

RELATED CONTENT


Back to Top