1 February 2005 A method of building pixel cells with an arbitrary vertex angle
Author Affiliations +
Abstract
Moiré fringes appearing in contact-type three-dimensional imaging systems cause serious image quality deterioration. The fringes are inevitable because the systems require overlapping a viewing-zone-forming optical plate on a display panel. An analysis shows that the visual effects of the fringes can be minimized by finding a proper overlapping angle between the panel and the plate. This angle imposes that pixel cell in full-parallax imaging systems should have the shape of either rhombus or parallelogram with a specific vertex angle. The pixel cell with the shape of the rhombus or parallelogram is implemented by approximating the boundaries of each pixel cell by staircase lines drawn along sides of the pixel. The slopes of the lines are determined by the ratio of the pixel numbers in the vertical and horizontal directions. This method allows creating pixel cells with a desired vertex angle for minimizing the moiré fringes, especially in full-parallax imaging systems.
©(2005) Society of Photo-Optical Instrumentation Engineers (SPIE)
Jung-Young Son, Vladmir V. Saveljev, Bahram Javidi, and Kae-Dal Kwak "A method of building pixel cells with an arbitrary vertex angle," Optical Engineering 44(2), 024003 (1 February 2005). https://doi.org/10.1117/1.1839886
Published: 1 February 2005
Lens.org Logo
CITATIONS
Cited by 11 scholarly publications and 1 patent.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Imaging systems

Image resolution

Stereoscopy

3D image processing

Cameras

Microlens array

Image quality

Back to Top