1 April 2005 Programmable control system for wavelength tuning and stabilization of optical fiber lasers
Juan Hernández-Cordero, Joel Escalante, Félix Núñez-Orozco
Author Affiliations +
Abstract
We study the performance of a simple computer-based control system for tuning and wavelength stabilization of an erbium-doped single-mode fiber laser. Tuning is achieved by stretching a fiber grating used as one of the mirrors for the laser cavity, while wavelength is monitored through an optical spectrum analyzer. The desired wavelength of emission is fed to the computer through a graphic computer interface, and an actuator stretches the grating to tune the fiber laser. Once the specified wavelength is achieved, the control systems stabilize the fiber laser by monitoring wavelength fluctuations due to parameters such as temperature variations. Accuracy for wavelength stabilization is limited only by the resolution of the optical spectrum analyzer (0.06 nm). Being a general purpose system, any other tuning methods or wavelength tracking devices such as etalons can be used. Thus, by using the proper devices, the computer-based system could be easily adapted for the tuning and stabilization of any other rare earth-doped optical fiber laser.
©(2005) Society of Photo-Optical Instrumentation Engineers (SPIE)
Juan Hernández-Cordero, Joel Escalante, and Félix Núñez-Orozco "Programmable control system for wavelength tuning and stabilization of optical fiber lasers," Optical Engineering 44(4), 044201 (1 April 2005). https://doi.org/10.1117/1.1880413
Published: 1 April 2005
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber lasers

Control systems

Fiber Bragg gratings

Laser stabilization

Spectrum analysis

Computing systems

Human-machine interfaces

RELATED CONTENT


Back to Top