1 January 2005 Use of waveguide light scattering for precision measurements of the statistical parameters of irregularities of integrated optical waveguide materials
Author Affiliations +
Optical Engineering, 44(1), 014601 (2005). doi:10.1117/1.1828469
Abstract
The problem of directed waveguide mode scattering in an irregular planar optical waveguide (PWG) is solved using the theory of perturbations. The solution of the inverse waveguide scattering problem consists of restoring the autocovariance function and determining irregularity parameters by the measuring data of a scattering diagram in the far zone. The new complex solution algorithm for the described inverse waveguide scattering problem is a combination of classic regularization and the quasi-optimal filtration (smoothing) of the measured data. The computer simulation enables us to show that our method makes it possible to receive an approximately correct solution of the inverse problem with a root mean square (rms) error in restoring the given autocovariance functions of no more than 35% in the presence of high real noise (SNR≥1). The statistical parameters of the irregularities in this case can be determined with an error less than 15 to 30%. The roughness parameters determined in the experiment are in good agreement with the parameters obtained by a scanning electron microscope (SEM) and by a standard mechanical profilometer.
Alexandre A. Yegorov, "Use of waveguide light scattering for precision measurements of the statistical parameters of irregularities of integrated optical waveguide materials," Optical Engineering 44(1), 014601 (1 January 2005). http://dx.doi.org/10.1117/1.1828469
JOURNAL ARTICLE
10 PAGES


SHARE
KEYWORDS
Waveguides

Scattering

Light scattering

Signal to noise ratio

Integrated optics

Inverse problems

Laser scattering

RELATED CONTENT


Back to Top