1 March 2005 Study of simultaneous measurement of temperature and pressure using double fiber Bragg gratings with polymer package
Author Affiliations +
Optical Engineering, 44(3), 034402 (2005). doi:10.1117/1.1870493
Abstract
A simple and practical method to simultaneously measure pressure and temperature using a double fiber Bragg grating (FBG) sensor is presented in which a double FBG is coated in a particular metal tube by a special polymer. In this manner, the inaccuracy induced by the mismatch of pressure and temperature sensitivity can be overcome effectively. The experimental results indicate that this scheme can measure pressure and temperature simultaneously. The temperature and pressure inaccuracy of sensors is about 0.5°C and 0.5 MPa, respectively, within the measuring range of 20 to 100°C and 0 to 20 MPa.
A. Sun, X. G. Qiao, Z. A. Jia, M. Li, D. Z. Zhao, "Study of simultaneous measurement of temperature and pressure using double fiber Bragg gratings with polymer package," Optical Engineering 44(3), 034402 (1 March 2005). http://dx.doi.org/10.1117/1.1870493
JOURNAL ARTICLE
4 PAGES


SHARE
KEYWORDS
Fiber Bragg gratings

Temperature metrology

Polymers

Sensors

Metals

Polymeric sensors

Optical engineering

Back to Top