1 April 2005 Sensitivity evaluation of fiber optic OC-48 p-i-n transimpedance amplifier receivers using sweep-frequency modulation and intermixing diagnostics
Author Affiliations +
Optical Engineering, 44(4), 044002 (2005). doi:10.1117/1.1883385
Abstract
The sensitivity of SONET p-i-n photodiode receivers with transimpedance amplifiers (PIN-TIA) from OC-3 to OC-48 data rates, measured by using a standard bit-error-rate tester (BERT) and a novel sweep-frequency-modulation/intermixing (SMIM) technique, are compared. A threshold intermixed voltage below 15.8 mV obtained by the SMIM method corresponding to the sensitivity of the PIN-TIA receiver beyond –32 dBm determined by BERT for the SONET OC-48 PIN-TIA receivers with a required BER of better than 10–10 is reported. The analysis interprets that the intermixed voltage for improving the PIN-TIA receiver sensitivity from –31 to –33 dBm has to be increased from 12.5 to 20.4 mV. As compared to the BERT, the SMIM is a relatively simplified, fast, and low-cost technique for on-line mass-production diagnostics for measuring the sensitivity and evaluating the BER performances of PIN-TIA receivers.
Gong-Ru Lin, Yu-Sheng Liao, "Sensitivity evaluation of fiber optic OC-48 p-i-n transimpedance amplifier receivers using sweep-frequency modulation and intermixing diagnostics," Optical Engineering 44(4), 044002 (1 April 2005). http://dx.doi.org/10.1117/1.1883385
JOURNAL ARTICLE
5 PAGES


SHARE
KEYWORDS
Receivers

Modulation

Diagnostics

Fiber amplifiers

Optical amplifiers

Transmitters

Clocks

RELATED CONTENT


Back to Top