1 June 2005 Welding of Al alloy plates using a novel high-average-power pulsed CO2 laser
Author Affiliations +
A novel high-average-power pulsed CO2 laser with a unique electrode structure is presented. The operation of a 5-kW transverse-flow CO2 laser with the preionized pulse-train switched technique results in pulsation of the laser power, and the average laser power is about 5 kW. The characteristic of this technique is switching the preionized pulses into pulse trains so as to use the small preionized power (hundreds of watts) to control the large main-discharge power (tens of kilowatts). By this means, the cost and the complexity of the power supply are greatly reduced. The welding of LF2, LF21, LD2, and LY12 aluminum alloy plates has been successfully achieved using this laser.
© (2005) Society of Photo-Optical Instrumentation Engineers (SPIE)
Haijun Gao, Haijun Gao, Zhaogu Cheng, Zhaogu Cheng, Guoliang Xu, Guoliang Xu, } "Welding of Al alloy plates using a novel high-average-power pulsed CO2 laser," Optical Engineering 44(6), 064201 (1 June 2005). https://doi.org/10.1117/1.1921187 . Submission:


Transverse-flow 1-kW CO2 laser excited by switching power
Proceedings of SPIE (April 29 2002)
Laser beam welding of aluminum alloys
Proceedings of SPIE (January 31 2008)
Efficient TEA CO2-laser-based coating removal system
Proceedings of SPIE (April 26 2007)

Back to Top