1 June 2005 Design, fabrication, and characterization of antenna-coupled metal-oxide-metal diodes for dual-band detection
Author Affiliations +
Optical Engineering, 44(6), 066401 (2005). doi:10.1117/1.1929647
Abstract
Two designs for antenna-coupled Ni-NiO-Ni diodes are fabricated and tested for dual-band detection in the millimeter-wave (MMW), 94-GHz, and infrared (IR), 28.3-THz, frequencies. The detector noise, antenna receiving properties, and noise equivalent power (NEP) are measured. The simultaneous dual-band response is verified.
Mohamed Ramy Abdel-Rahmen, Brian Monacelli, Arthur Robert Weeks, Guy Zummo, Glenn David Boreman, "Design, fabrication, and characterization of antenna-coupled metal-oxide-metal diodes for dual-band detection," Optical Engineering 44(6), 066401 (1 June 2005). http://dx.doi.org/10.1117/1.1929647
JOURNAL ARTICLE
7 PAGES


SHARE
KEYWORDS
Diodes

Antennas

Extremely high frequency

Sensors

Signal to noise ratio

Infrared radiation

Polarization

Back to Top