1 July 2005 Bilayer pellicle and bilayer-coated prism beamsplitters for the division-of-amplitude photopolarimeter
Author Affiliations +
A procedure is presented for the design of bilayer pellicle and bilayer-coated prism beam splitters that serve as the key optical element of the division-of-amplitude photopolarimeter (DOAP). The bilayer consists of two transparent thin films of sufficiently different refractive indices whose thicknesses are selected to achieve 50 to 50% split ratio and optimum ellipsometric parameters in reflection and transmission, such that the determinant of the DOAP instrument matrix is maximized at the proper angle of incidence. As a specific example, we present a Ge-coated nitrocellulose (NC) first-order pellicle beamsplitter for the near IR (2.0 to 2.2 µm). Visible designs include a GaP-coated NC fourth-order pellicle and a SiO2-GaP bilayer-coated glass prism at and near the 633-nm wavelength. Operation of these beamsplitters over a range of incidence angles, wavelengths, and in the presence of ±5% film thickness errors is also considered.
© (2005) Society of Photo-Optical Instrumentation Engineers (SPIE)
Rasheed M. A. Azzam, Rasheed M. A. Azzam, A. De, A. De, F. F. Sudradjat, F. F. Sudradjat, } "Bilayer pellicle and bilayer-coated prism beamsplitters for the division-of-amplitude photopolarimeter," Optical Engineering 44(7), 073802 (1 July 2005). https://doi.org/10.1117/1.1951587 . Submission:


Design and analysis of non polarizing beam splitter in a...
Proceedings of SPIE (November 17 2008)
3M PBS for high-performance LCOS optical engine
Proceedings of SPIE (March 27 2003)
A gap sensing technique based on surface plasmon resonance
Proceedings of SPIE (August 29 2006)
Integration Of Thin-Film Coatings Into Optical Systems
Proceedings of SPIE (September 15 1980)
Polarizing Beamsplitters And Combiners
Proceedings of SPIE (February 28 1974)

Back to Top