1 July 2005 Using a discrete thermal model to obtain a linear frequency ramping in a frequency-modulated continuous-wave system
Author Affiliations +
Abstract
The lasing wavelength of a single-section distributed feedback (DFB) laser diode can be modulated by modulating the drive current. This makes it possible to utilize the DFB laser diode in a frequency-modulated continuous wave (FMCW) range and velocity measuring system. In FMCW, the frequency of the laser is ramped, and the frequency difference between the reflected wave and a local-oscillator wave is monitored. For maximum performance the frequency ramping should be linear. Due to thermal phenomena, a linear ramping of the current seldom results in a linear ramping of the optical frequency. We have derived a discrete thermal model, using resistors and capacitors, of our laser module. The thermal model was then used as a starting point to model the frequency behavior of the laser and to derive modulation currents that resulted in a linear frequency ramping at some different modulation frequencies.
© (2005) Society of Photo-Optical Instrumentation Engineers (SPIE)
Daniel Nordin, Daniel Nordin, Kalevi Hyyppae, Kalevi Hyyppae, } "Using a discrete thermal model to obtain a linear frequency ramping in a frequency-modulated continuous-wave system," Optical Engineering 44(7), 074202 (1 July 2005). https://doi.org/10.1117/1.1949205 . Submission:
JOURNAL ARTICLE
6 PAGES


SHARE
Back to Top