1 September 2005 X-ray spectra from a cerium target and their application to cone beam K-edge angiography
Author Affiliations +
The cerium-target x-ray tube is useful for performing cone beam K-edge angiography, because K-series characteristic x-rays from the cerium target are absorbed effectively by iodine-based contrast media. The x-ray generator consists of a main controller and a unit with a high-voltage circuit and a fixed anode x-ray tube. The tube is a glass-enclosed diode with a cerium target and a 0.5-mm-thick beryllium window. The maximum tube voltage and current are 65 kV and 0.4 mA, respectively, and the focal-spot sizes are 1.3×0.9 mm. Cerium K-series characteristic x-rays are left, using a 3.0-mm-thick aluminum filter, and the x-ray intensity is 19.9 μGy/s at 1.0 m from the source with a tube voltage of 60 kV and a current of 0.40 mA. Angiography is performed with a computed radiography system using iodine-based microspheres 15 μm in diameter. In angiography of nonliving animals, we observe fine blood vessels of approximately 100 μm with high contrasts.
© (2005) Society of Photo-Optical Instrumentation Engineers (SPIE)
Eiichi Sato, Eiichi Sato, Akira Yamadera, Akira Yamadera, Etsuro Tanaka, Etsuro Tanaka, Hidezo Mori, Hidezo Mori, Toshiaki Kawai, Toshiaki Kawai, Fumihito Ito, Fumihito Ito, Takashi Inoue, Takashi Inoue, Akira Ogawa, Akira Ogawa, Shigehiro Sato, Shigehiro Sato, Kazuyoshi Takayama, Kazuyoshi Takayama, Jun Onagawa, Jun Onagawa, Hideaki Ido, Hideaki Ido, } "X-ray spectra from a cerium target and their application to cone beam K-edge angiography," Optical Engineering 44(9), 096502 (1 September 2005). https://doi.org/10.1117/1.2049268 . Submission:

Back to Top