1 May 2006 Cu/CuI-coated hollow glass waveguides for delivery of infrared radiation
Roshan J. George, James A. Harrington
Author Affiliations +
Abstract
IR-transmissive hollow waveguides have been fabricated by depositing Cu and CuI thin-film coatings inside silica and polycarbonate tubing. These guides, which are similar in design to Ag/AgI-coated ones, have straight losses as low as 0.19 dB/m for a 1000-µm-bore waveguide at 10.6 µm. They also transmit IR wavelengths from 2 to more than 15 µm. This makes them very useful for broadband IR applications, including chemical sensing and radiometry, as well as for use in the delivery of IR laser power for laser surgery and low-power cutting. The thin-film coatings are deposited using a liquid-chemistry technique in which a Cu film is first formed on the inside of the tubing, followed by the deposition of the dielectric CuI layer. The thickness of the CuI layer is adjusted to give low loss at specific IR laser wavelengths or to give a broadband response for the transmission of incoherent light.
©(2006) Society of Photo-Optical Instrumentation Engineers (SPIE)
Roshan J. George and James A. Harrington "Cu/CuI-coated hollow glass waveguides for delivery of infrared radiation," Optical Engineering 45(5), 055004 (1 May 2006). https://doi.org/10.1117/1.2203367
Published: 1 May 2006
Lens.org Logo
CITATIONS
Cited by 8 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Waveguides

Copper

Dielectrics

Infrared radiation

Silver

Glasses

Metals

Back to Top