1 June 2006 Change in data marks and groove structures of compact recordable disks in response to a high power laser beam
Author Affiliations +
Abstract
Changes in data marks and groove structures are examined when a high power laser beam (>0.5 W) is focused on compact disk recordable (CD-R) data layers. Observations are recorded as a function of exposure condition and the type of dye used in the recording layer. All samples experience a decrease in the depths of data mark features and the pregroove modulations on exposure. Data marks on cyanine- and azo-dye disks become optically invisible after exposure, while data marks on phthalocyanine-dye disks remain visible, even after high-power exposure. Also, phthalocyanine-dye disks show interesting phenomena, including mixture of the dye and the substrate material during recording and contrast reversal of the marks.
©(2006) Society of Photo-Optical Instrumentation Engineers (SPIE)
Taeyoung J. Choi and Thomas D. Milster "Change in data marks and groove structures of compact recordable disks in response to a high power laser beam," Optical Engineering 45(6), 064302 (1 June 2006). https://doi.org/10.1117/1.2214714
Published: 1 June 2006
Lens.org Logo
CITATIONS
Cited by 8 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
High power lasers

Optical microscopes

Interfaces

Light emitting diodes

Modulation

Optical engineering

Optical filters

RELATED CONTENT

Properties of mid IR diodes with n InAsSbP n InAs...
Proceedings of SPIE (February 25 2010)
Quasi-passive heat sink for high-power laser diodes
Proceedings of SPIE (February 23 2009)
A new rate 8 12 run length limited (2, 9)...
Proceedings of SPIE (July 17 2007)
Restrictions on pit length in multi-level read-only disk
Proceedings of SPIE (March 19 2009)

Back to Top