1 October 2006 Fabrication of polymer waveguides using a molding process
Author Affiliations +
Abstract
Polymer waveguides are successfully fabricated by a simple method, which is incorporated with a lithography-galvanic (LIGA)-like and micromolding process. The refractive index of the UV polymer used in these experiments is changed by an extremely low electric field. The measured propagation loss is 0.32 dB/cm for 1.3 µm and 0.30 dB/cm for 1.55 µm. This process is easy, simple, and suitable for mass production.
© (2006) Society of Photo-Optical Instrumentation Engineers (SPIE)
Wei-Chung Chuang, Wei-Chung Chuang, Chi-Ting Ho, Chi-Ting Ho, Ruey Fang Shyu, Ruey Fang Shyu, } "Fabrication of polymer waveguides using a molding process," Optical Engineering 45(10), 103401 (1 October 2006). https://doi.org/10.1117/1.2360689 . Submission:
JOURNAL ARTICLE
5 PAGES


SHARE
RELATED CONTENT


Back to Top