1 February 2006 Design and fabrication of color filters for projection display system
Author Affiliations +
Optical Engineering, 45(2), 023801 (2006). doi:10.1117/1.2167086
Color filters are key components in an optical engine projection display system. In this paper, a new admittance-matching method for designing and fabricating the high performance filters is described, in which the optimized layers are limited to the interfaces between the stack (each combination of quarter-wave-optical-thickness film layers is called a stack) and stack, or between stack and substrate, or between stack and incident medium. This method works well in designing filters containing multiple stacks such as UV-IR cut and broadband filters. The tolerance and angle sensitivity for the designed film stacks are analyzed. The thermal stability of the sample color filters was measured. A good result in optical performance and thermal stability was obtained through the new design approach.
Xueke Xu, Jianda Shao, Zhengxiu Fan, "Design and fabrication of color filters for projection display system," Optical Engineering 45(2), 023801 (1 February 2006). https://doi.org/10.1117/1.2167086


Non-polarizing filter design
Proceedings of SPIE (December 08 2004)

Back to Top