1 May 2006 Cu/CuI-coated hollow glass waveguides for delivery of infrared radiation
Author Affiliations +
IR-transmissive hollow waveguides have been fabricated by depositing Cu and CuI thin-film coatings inside silica and polycarbonate tubing. These guides, which are similar in design to Ag/AgI-coated ones, have straight losses as low as 0.19 dB/m for a 1000-µm-bore waveguide at 10.6 µm. They also transmit IR wavelengths from 2 to more than 15 µm. This makes them very useful for broadband IR applications, including chemical sensing and radiometry, as well as for use in the delivery of IR laser power for laser surgery and low-power cutting. The thin-film coatings are deposited using a liquid-chemistry technique in which a Cu film is first formed on the inside of the tubing, followed by the deposition of the dielectric CuI layer. The thickness of the CuI layer is adjusted to give low loss at specific IR laser wavelengths or to give a broadband response for the transmission of incoherent light.
© (2006) Society of Photo-Optical Instrumentation Engineers (SPIE)
Roshan J. George, Roshan J. George, James A. Harrington, James A. Harrington, } "Cu/CuI-coated hollow glass waveguides for delivery of infrared radiation," Optical Engineering 45(5), 055004 (1 May 2006). https://doi.org/10.1117/1.2203367 . Submission:


Back to Top